This is an old revision of the document!
DSM Installation & Calibration
- DSM can be installed obliquely facing the driver or directly facing the driver.
- The driver’s face can not be blocked by the steering wheel.
- The driver’s head must be in the middle of the image.
- The driver’s face (profile) can not cover the DSM lens light compensation fully.
DSM “Obliquely-facing to the driver” Installation
DSM camera can be installed obliquely facing the driver if there is not any right place on the dashboard (e.g. it is not flat enough). But the deviation of the angle can’t be bigger than 30 degrees.
